The Potential of Elastography in MSK Ultrasound

Elastography is a method of imaging that detects the compressibility or stiffness of tissues in the imaging field and then overlays a false-color map upon the greyscale image to indicate which tissues are hard/stiff versus soft/compressible. The science behind the technique is beyond the scope of a blog post, particularly as there are several methods by which elastography can be performed.  

In practical terms, elastography is useful in identifying lesions that are sonographically iso-dense compared to their surroundings. Such lesions, while they are therefore visually “iso-grey” (if you will tolerate a neologism), may not be iso-compressible despite their iso-density, and thus when their differential compressibility is identified by elastography it becomes possible to characterize a lesion whose greyscale appearance is not instructive. Among the most common current uses of elastography are the characterization of breast and liver lesions, and indeed the well-known Fibroscan device is, in essence, liver elastography.

There are several instances in the field of musculoskeletal (MSK)/rheumatologic ultrasound in which this technology is appealing, but more work is needed before widespread use will be advisable. I will mention only two of the most obvious examples here. 

Example One

The first example is in the interrogation of a symptomatic tendon or ligament. Such a structure, whose normal function involves incredible amounts of linear tension, when disrupted by trauma or disease, would be expected to lose integrity in the region of the insult and become softer/more compressible than normal in that area.

Traditionally, elastography is not used to measure tendons and ligaments despite the validity of the above statement. The reason for this is that the stiffness of tissue, when measured by elastography, can be expressed in terms of the speed at which a deformation (compression wave) in the tissue propagates, usually in meters per second (there are other units by which stiffness can be measured, but for simplicity’s sake, I will leave it at that).

In the classical case of breast and liver lesions, this is not an issue since the surrounding normal tissue is relatively soft and compressible, so the speed of the propagation of a compression wave is relatively slow. Thus, most elastography measurements top out at a propagation speed of about 10 meters per second, and most normal and abnormal breast/liver tissue will have stiffness values somewhat slower than this. Tendons and ligaments, on the other hand, are by nature very hard/noncompressible. Even in their “relaxed” state, these tissues are so bowstring-tight (relatively) that measuring a normal Achilles’ tendon, for example, will yield only a maxed-out value of “offscale hard” throughout the entire structure. 

It is tempting to say that one could simply recalibrate the machine to measure faster propagation speeds, but, unfortunately, we run into limitations of our current technology. It is simply not possible currently to measure velocities much faster than 10 m/s. 

While we await advancements in technology, the current workaround is to trust that a damaged region of tendon or ligament will be significantly softer, and thus transmit compression waves much more slowly. Therefore, we simply consider any propagation speed that falls out of “offscale” and into the measurable range to be an indicator of pathology.

Example Two

The second example of the potential rheumatologic utility of elastography is in the assessment of systemic sclerosis, commonly known as scleroderma. As the Greek name would suggest, this disease usually includes a characteristic hardening of the skin. The problem is that there is currently no reliable way to quantify skin stiffness. The existing gold standard is a semi-quantitative scoring of skin thickening performed by simple physical examination in which each of several predefined regions of the skin is palpated and assigned a value from 0 to 3. This results in an overall score known as the Modified Rodnan Skin Score (MRSS). Performing Rodnan scoring requires an experienced clinician, and since scleroderma is a rare disease, very few physicians have a large enough cohort in their practice to be able to consider themselves expert Rodnan scorers.

This leads to a host of problems, and one of the worst is that clinical trials in scleroderma (a devastating and potentially fatal disease for which no good treatment exists) are very difficult to conduct because one of the primary endpoints of any trial will be the degree of improvement found in this semi-quantitative and hard-to-perform examination, which is subject to severe inter-rater reliability problems.

When I first started as a rheumatology fellow, I agreed to help with a scleroderma clinical trial in the role of a blinded efficacy assessor. The sponsor brought a dozen or so of us to a hotel for training, and all morning long we cycled through a series of hotel meeting rooms, each containing a volunteer patient for us to score.

It was a disaster.

After lunch, the representative from the sponsor got up to the podium and told us to rip up our afternoon agendas—we were going back to the meeting rooms to examine the volunteers again in an effort to improve the scoring consensus.

Clearly, this situation screams for elastography. The objective measurement of skin stiffness is precisely the datum that is sorely needed. Sadly, our current technology again fails us, as present-day elastography has limitations in resolution and the skin by its anatomic location, will always be very nearly directly applied to the probe face, in a region outside the focal zone of the beam where the measurement physics work best. Further, one of the techniques for performing elastography is highly operator-dependent, because the compression waves being measured are generated by manually varying the pressure of the probe against the skin—definitely a skill that must be learned over time and one that opens the door once more to inter-rater variability.

Overall, elastography holds great promise for MSK/rheumatologic applications in the future, as described in the two examples above. For now, however, it’s currently a technology that is “not ready for prime time” in this field.

This post is intended as a companion to “What Rheumatologists Really Need for Ultrasound Is…”, which discusses advances in ultrasound technology that are sorely needed in the field of MSK ultrasound, and specifically in rheumatology.

Dr. Mandelin is an academic rheumatologist, registered in MSK ultrasound (RhMSUS) by the American College of Rheumatology and certified in MSK ultrasound (RMSK) by the Alliance for Physician Certification & Advancement. He currently serves the AIUM as secretary of the High-Frequency Clinical and Preclinical Imaging Community. Connect with him on Twitter @NU_Rheum_MSK_US.

What Rheumatologists Really Need for Ultrasound Is…

After I graduated from a Rheumatology fellowship, I was invited to stay on as junior faculty and several years thereafter the ACR (that acronym stands for American College of Rheumatology – I have no idea why most people who are into ultrasound always think it means something else…) developed an educational initiative aimed at bringing MSK US to every Rheumatology training program in the USA.

The ACR began to invite about 20 training programs per year to nominate one faculty member whose journey through the Ultrasound School of North American Rheumatologists (USSONAR) would be subsidized by the College. The idea was that each USSONAR graduate would then start an MSK US training program at his or her home institution, and since there are only about 120 Rheumatology training programs in the USA, the whole process would only take about 6 years. The rate of adoption among training programs was of course not 100%, and there are several key barriers to the development of an ultrasound training program, but at our institution it worked.

I’ve been doing point-of-care MSK ultrasound ever since I completed USSONAR and passed my certification exams, and our institution now has a required half-day MSK ultrasound clinic in which every Rheumatology fellow spends 6 months as part of their required curriculum. While MSK US certification is not required for graduation or to sit for boards, I’m proud to say that so far three of our Rheumatology graduates have opted to sit for the exam and are now ultrasound certified.

The program has been in place for about 7 years now, so it seems a good time to begin reflecting on my impressions of how MSK US fits into a Rheumatology practice, and more importantly some of the ways in which the current off-the-shelf technology doesn’t fully meet our specialty’s needs.

Clearly, MSK US is a major boon to Rheumatology in terms of needle guidance. Our half-day ultrasound clinic has made it possible for us to stop referring hip injections out to Interventional Radiology or Anesthesia-Pain, and I’m hoping that we will soon be able to bring sacroiliac joint injections back in-house as well. Diagnostically, the most common reason a patient is referred to the ultrasound clinic is for disambiguation of the borderline / nebulous case—that patient who endorses symptoms that sound like active inflammation but whose physical exam is benign. Our most common diagnostic referral is to answer the question of whether or not subclinical synovitis is present in the small joints of the hands, and that leads us to the first instance of current MSK US technology being less than a seamless integration into clinical practice and more of a square peg being jammed into a round hole.

The soft tissues associated with the small joints of the hands are at very shallow depths, usually under 1 cm in most patients. My very first ultrasound machine was a SonoSite M-MSK, and you adjusted the depth with a pair of pushbuttons. The standard procedure (and I would teach the fellows exactly this) was to start up the machine and then just start tapping the “less depth” button over and over.

Image of a finger joint with a ruler indicating the small height of the joint  is less than 2 centimeters.

“Just keep tapping,” I would tell the fellow. “Tap it like you’re playing Space Invaders, and just keep hitting it until the machine starts beeping in protest because the minimum depth has been reached.”

Even at that minimum setting, most ultrasound machines still show a depth of about 2 cm. I often joke with the fellows that this setting would be wonderful if we were trying to look clear through the patient’s hand and figure out what material the cushion on the exam table was made of!

Astute readers will also realize that no matter what the depth on the machine is set to, this puts the target structure (again, usually at a depth of 0.5–1 cm) closer to the probe face than the optimal focal zone distance on many probes—we are giving ourselves a case of technological hyperopia.

A stand-off pad will help keep the tissue at a better focal distance, but these pads can be cumbersome and will make the learning curve for any fellow even steeper than it already is by virtue of obscuring the tactile input, which is integral to the hands-on nature of point-of-care sonography. Ultrasound doesn’t feel like a natural extension of the physical exam with a stand-off pad in the way.

The real solution here is to switch to ultra-high-frequency ultrasound, something in the 50–70 MHz range, where the depth bar at the edge of the monitor is labeled in millimeters instead of centimeters. For small joints, I think this has to be the future of MSK ultrasound. This is why I was interested in the AIUM’s Community on High Frequency Clinical and Preclinical Imaging, and ultimately volunteered to serve among its leadership. Sadly, these UHF machines are expensive and they are often purpose-built for ultra-high-frequency only, meaning that a top of the line Rheumatologic MSK US clinic would need to own two machines, one UHF and one standard.  

This won’t fly in most places.

One of the main reasons why the ACR’s vision for an MSK US curriculum in every Rheumatology training program has not been fully realized is the expense involved in acquiring even one machine.

When we are looking at the hands of that patient whose clinical presentation is ambiguous—whose symptoms don’t seem to match their physical exam and in whom occult synovitis is suspected—we are looking for three telltale sonographic signs of the ravages of inflammation: hypertrophy of the synovium, the presence of a joint effusion, and hyperemia from the irritated joint lining struggling to summon blood flow to meet its elevated metabolic demands. The first two are often lumped together under the umbrella of “grayscale findings,” and the hyperemia is of course measured by Doppler.

The second hurdle for MSK US in the field of Rheumatology, then, is that of Doppler sensitivity. We are trying to examine and even semi-quantify the blood flow in capillaries, using equipment designed to measure the jets from regurgitant heart valves. Power Doppler is helpful here, due to its independence from the angle of insonation, but again we end up playing every trick in the book (starting with turning the wall filter off completely, if the machine even allows it) trying to squeeze every iota of signal out of the noise.

I always start the hand exam with a calibration image, in which I capture the blood flow in the pulp of a fingertip. Sometimes, especially in the midst of Chicago winters, you can’t even tell the Doppler is on at all. Currently, there’s nothing to do in that situation other than to comment in the report that Doppler calibration failed and thus the sensitivity of the study for detecting active synovitis (the very thing for which the study was ordered) is significantly compromised.

Taken together, it would seem that perhaps what we really need is for manufacturers to go beyond a blanket “MSK” setting in their machines and offer a true “Rheum” optimization package.

Dr. Mandelin is an academic rheumatologist, registered in MSK ultrasound (RhMSUS) by the American College of Rheumatology and certified in MSK ultrasound (RMSK) by the Alliance for Physician Certification & Advancement. He currently serves the AIUM as secretary of the High Frequency Clinical and Preclinical Imaging Community.

Where do you think MSK ultrasound is headed? Rheumatologists, where else does the technology not quite work in terms of your practice? Comment below or join in the conversation on Twitter, where my handle is @NU_Rheum_MSK_US.

Interested in learning more from the Scan? Check out the following posts: